sccp.go

     1  // Copyright 2023 The Go Authors. All rights reserved.
     2  // Use of this source code is governed by a BSD-style
     3  // license that can be found in the LICENSE file.
     4  
     5  package ssa
     6  
     7  import (
     8  	"fmt"
     9  )
    10  
    11  // ----------------------------------------------------------------------------
    12  // Sparse Conditional Constant Propagation
    13  //
    14  // Described in
    15  // Mark N. Wegman, F. Kenneth Zadeck: Constant Propagation with Conditional Branches.
    16  // TOPLAS 1991.
    17  //
    18  // This algorithm uses three level lattice for SSA value
    19  //
    20  //      Top        undefined
    21  //     / | \
    22  // .. 1  2  3 ..   constant
    23  //     \ | /
    24  //     Bottom      not constant
    25  //
    26  // It starts with optimistically assuming that all SSA values are initially Top
    27  // and then propagates constant facts only along reachable control flow paths.
    28  // Since some basic blocks are not visited yet, corresponding inputs of phi become
    29  // Top, we use the meet(phi) to compute its lattice.
    30  //
    31  // 	  Top ∩ any = any
    32  // 	  Bottom ∩ any = Bottom
    33  // 	  ConstantA ∩ ConstantA = ConstantA
    34  // 	  ConstantA ∩ ConstantB = Bottom
    35  //
    36  // Each lattice value is lowered most twice(Top to Constant, Constant to Bottom)
    37  // due to lattice depth, resulting in a fast convergence speed of the algorithm.
    38  // In this way, sccp can discover optimization opportunities that cannot be found
    39  // by just combining constant folding and constant propagation and dead code
    40  // elimination separately.
    41  
    42  // Three level lattice holds compile time knowledge about SSA value
    43  const (
    44  	top      int8 = iota // undefined
    45  	constant             // constant
    46  	bottom               // not a constant
    47  )
    48  
    49  type lattice struct {
    50  	tag int8   // lattice type
    51  	val *Value // constant value
    52  }
    53  
    54  type worklist struct {
    55  	f            *Func               // the target function to be optimized out
    56  	edges        []Edge              // propagate constant facts through edges
    57  	uses         []*Value            // re-visiting set
    58  	visited      map[Edge]bool       // visited edges
    59  	latticeCells map[*Value]lattice  // constant lattices
    60  	defUse       map[*Value][]*Value // def-use chains for some values
    61  	defBlock     map[*Value][]*Block // use blocks of def
    62  	visitedBlock []bool              // visited block
    63  }
    64  
    65  // sccp stands for sparse conditional constant propagation, it propagates constants
    66  // through CFG conditionally and applies constant folding, constant replacement and
    67  // dead code elimination all together.
    68  func sccp(f *Func) {
    69  	var t worklist
    70  	t.f = f
    71  	t.edges = make([]Edge, 0)
    72  	t.visited = make(map[Edge]bool)
    73  	t.edges = append(t.edges, Edge{f.Entry, 0})
    74  	t.defUse = make(map[*Value][]*Value)
    75  	t.defBlock = make(map[*Value][]*Block)
    76  	t.latticeCells = make(map[*Value]lattice)
    77  	t.visitedBlock = f.Cache.allocBoolSlice(f.NumBlocks())
    78  	defer f.Cache.freeBoolSlice(t.visitedBlock)
    79  
    80  	// build it early since we rely heavily on the def-use chain later
    81  	t.buildDefUses()
    82  
    83  	// pick up either an edge or SSA value from worklilst, process it
    84  	for {
    85  		if len(t.edges) > 0 {
    86  			edge := t.edges[0]
    87  			t.edges = t.edges[1:]
    88  			if _, exist := t.visited[edge]; !exist {
    89  				dest := edge.b
    90  				destVisited := t.visitedBlock[dest.ID]
    91  
    92  				// mark edge as visited
    93  				t.visited[edge] = true
    94  				t.visitedBlock[dest.ID] = true
    95  				for _, val := range dest.Values {
    96  					if val.Op == OpPhi || !destVisited {
    97  						t.visitValue(val)
    98  					}
    99  				}
   100  				// propagates constants facts through CFG, taking condition test
   101  				// into account
   102  				if !destVisited {
   103  					t.propagate(dest)
   104  				}
   105  			}
   106  			continue
   107  		}
   108  		if len(t.uses) > 0 {
   109  			use := t.uses[0]
   110  			t.uses = t.uses[1:]
   111  			t.visitValue(use)
   112  			continue
   113  		}
   114  		break
   115  	}
   116  
   117  	// apply optimizations based on discovered constants
   118  	constCnt, rewireCnt := t.replaceConst()
   119  	if f.pass.debug > 0 {
   120  		if constCnt > 0 || rewireCnt > 0 {
   121  			fmt.Printf("Phase SCCP for %v : %v constants, %v dce\n", f.Name, constCnt, rewireCnt)
   122  		}
   123  	}
   124  }
   125  
   126  func equals(a, b lattice) bool {
   127  	if a == b {
   128  		// fast path
   129  		return true
   130  	}
   131  	if a.tag != b.tag {
   132  		return false
   133  	}
   134  	if a.tag == constant {
   135  		// The same content of const value may be different, we should
   136  		// compare with auxInt instead
   137  		v1 := a.val
   138  		v2 := b.val
   139  		if v1.Op == v2.Op && v1.AuxInt == v2.AuxInt {
   140  			return true
   141  		} else {
   142  			return false
   143  		}
   144  	}
   145  	return true
   146  }
   147  
   148  // possibleConst checks if Value can be fold to const. For those Values that can
   149  // never become constants(e.g. StaticCall), we don't make futile efforts.
   150  func possibleConst(val *Value) bool {
   151  	if isConst(val) {
   152  		return true
   153  	}
   154  	switch val.Op {
   155  	case OpCopy:
   156  		return true
   157  	case OpPhi:
   158  		return true
   159  	case
   160  		// negate
   161  		OpNeg8, OpNeg16, OpNeg32, OpNeg64, OpNeg32F, OpNeg64F,
   162  		OpCom8, OpCom16, OpCom32, OpCom64,
   163  		// math
   164  		OpFloor, OpCeil, OpTrunc, OpRoundToEven, OpSqrt,
   165  		// conversion
   166  		OpTrunc16to8, OpTrunc32to8, OpTrunc32to16, OpTrunc64to8,
   167  		OpTrunc64to16, OpTrunc64to32, OpCvt32to32F, OpCvt32to64F,
   168  		OpCvt64to32F, OpCvt64to64F, OpCvt32Fto32, OpCvt32Fto64,
   169  		OpCvt64Fto32, OpCvt64Fto64, OpCvt32Fto64F, OpCvt64Fto32F,
   170  		OpCvtBoolToUint8,
   171  		OpZeroExt8to16, OpZeroExt8to32, OpZeroExt8to64, OpZeroExt16to32,
   172  		OpZeroExt16to64, OpZeroExt32to64, OpSignExt8to16, OpSignExt8to32,
   173  		OpSignExt8to64, OpSignExt16to32, OpSignExt16to64, OpSignExt32to64,
   174  		// bit
   175  		OpCtz8, OpCtz16, OpCtz32, OpCtz64,
   176  		// mask
   177  		OpSlicemask,
   178  		// safety check
   179  		OpIsNonNil,
   180  		// not
   181  		OpNot:
   182  		return true
   183  	case
   184  		// add
   185  		OpAdd64, OpAdd32, OpAdd16, OpAdd8,
   186  		OpAdd32F, OpAdd64F,
   187  		// sub
   188  		OpSub64, OpSub32, OpSub16, OpSub8,
   189  		OpSub32F, OpSub64F,
   190  		// mul
   191  		OpMul64, OpMul32, OpMul16, OpMul8,
   192  		OpMul32F, OpMul64F,
   193  		// div
   194  		OpDiv32F, OpDiv64F,
   195  		OpDiv8, OpDiv16, OpDiv32, OpDiv64,
   196  		OpDiv8u, OpDiv16u, OpDiv32u, OpDiv64u,
   197  		OpMod8, OpMod16, OpMod32, OpMod64,
   198  		OpMod8u, OpMod16u, OpMod32u, OpMod64u,
   199  		// compare
   200  		OpEq64, OpEq32, OpEq16, OpEq8,
   201  		OpEq32F, OpEq64F,
   202  		OpLess64, OpLess32, OpLess16, OpLess8,
   203  		OpLess64U, OpLess32U, OpLess16U, OpLess8U,
   204  		OpLess32F, OpLess64F,
   205  		OpLeq64, OpLeq32, OpLeq16, OpLeq8,
   206  		OpLeq64U, OpLeq32U, OpLeq16U, OpLeq8U,
   207  		OpLeq32F, OpLeq64F,
   208  		OpEqB, OpNeqB,
   209  		// shift
   210  		OpLsh64x64, OpRsh64x64, OpRsh64Ux64, OpLsh32x64,
   211  		OpRsh32x64, OpRsh32Ux64, OpLsh16x64, OpRsh16x64,
   212  		OpRsh16Ux64, OpLsh8x64, OpRsh8x64, OpRsh8Ux64,
   213  		// safety check
   214  		OpIsInBounds, OpIsSliceInBounds,
   215  		// bit
   216  		OpAnd8, OpAnd16, OpAnd32, OpAnd64,
   217  		OpOr8, OpOr16, OpOr32, OpOr64,
   218  		OpXor8, OpXor16, OpXor32, OpXor64:
   219  		return true
   220  	default:
   221  		return false
   222  	}
   223  }
   224  
   225  func (t *worklist) getLatticeCell(val *Value) lattice {
   226  	if !possibleConst(val) {
   227  		// they are always worst
   228  		return lattice{bottom, nil}
   229  	}
   230  	lt, exist := t.latticeCells[val]
   231  	if !exist {
   232  		return lattice{top, nil} // optimistically for un-visited value
   233  	}
   234  	return lt
   235  }
   236  
   237  func isConst(val *Value) bool {
   238  	switch val.Op {
   239  	case OpConst64, OpConst32, OpConst16, OpConst8,
   240  		OpConstBool, OpConst32F, OpConst64F:
   241  		return true
   242  	default:
   243  		return false
   244  	}
   245  }
   246  
   247  // buildDefUses builds def-use chain for some values early, because once the
   248  // lattice of a value is changed, we need to update lattices of use. But we don't
   249  // need all uses of it, only uses that can become constants would be added into
   250  // re-visit worklist since no matter how many times they are revisited, uses which
   251  // can't become constants lattice remains unchanged, i.e. Bottom.
   252  func (t *worklist) buildDefUses() {
   253  	for _, block := range t.f.Blocks {
   254  		for _, val := range block.Values {
   255  			for _, arg := range val.Args {
   256  				// find its uses, only uses that can become constants take into account
   257  				if possibleConst(arg) && possibleConst(val) {
   258  					if _, exist := t.defUse[arg]; !exist {
   259  						t.defUse[arg] = make([]*Value, 0, arg.Uses)
   260  					}
   261  					t.defUse[arg] = append(t.defUse[arg], val)
   262  				}
   263  			}
   264  		}
   265  		for _, ctl := range block.ControlValues() {
   266  			// for control values that can become constants, find their use blocks
   267  			if possibleConst(ctl) {
   268  				t.defBlock[ctl] = append(t.defBlock[ctl], block)
   269  			}
   270  		}
   271  	}
   272  }
   273  
   274  // addUses finds all uses of value and appends them into work list for further process
   275  func (t *worklist) addUses(val *Value) {
   276  	for _, use := range t.defUse[val] {
   277  		if val == use {
   278  			// Phi may refer to itself as uses, ignore them to avoid re-visiting phi
   279  			// for performance reason
   280  			continue
   281  		}
   282  		t.uses = append(t.uses, use)
   283  	}
   284  	for _, block := range t.defBlock[val] {
   285  		if t.visitedBlock[block.ID] {
   286  			t.propagate(block)
   287  		}
   288  	}
   289  }
   290  
   291  // meet meets all of phi arguments and computes result lattice
   292  func (t *worklist) meet(val *Value) lattice {
   293  	optimisticLt := lattice{top, nil}
   294  	for i := 0; i < len(val.Args); i++ {
   295  		edge := Edge{val.Block, i}
   296  		// If incoming edge for phi is not visited, assume top optimistically.
   297  		// According to rules of meet:
   298  		// 		Top ∩ any = any
   299  		// Top participates in meet() but does not affect the result, so here
   300  		// we will ignore Top and only take other lattices into consideration.
   301  		if _, exist := t.visited[edge]; exist {
   302  			lt := t.getLatticeCell(val.Args[i])
   303  			if lt.tag == constant {
   304  				if optimisticLt.tag == top {
   305  					optimisticLt = lt
   306  				} else {
   307  					if !equals(optimisticLt, lt) {
   308  						// ConstantA ∩ ConstantB = Bottom
   309  						return lattice{bottom, nil}
   310  					}
   311  				}
   312  			} else if lt.tag == bottom {
   313  				// Bottom ∩ any = Bottom
   314  				return lattice{bottom, nil}
   315  			} else {
   316  				// Top ∩ any = any
   317  			}
   318  		} else {
   319  			// Top ∩ any = any
   320  		}
   321  	}
   322  
   323  	// ConstantA ∩ ConstantA = ConstantA or Top ∩ any = any
   324  	return optimisticLt
   325  }
   326  
   327  func computeLattice(f *Func, val *Value, args ...*Value) lattice {
   328  	// In general, we need to perform constant evaluation based on constant args:
   329  	//
   330  	//  res := lattice{constant, nil}
   331  	// 	switch op {
   332  	// 	case OpAdd16:
   333  	//		res.val = newConst(argLt1.val.AuxInt16() + argLt2.val.AuxInt16())
   334  	// 	case OpAdd32:
   335  	// 		res.val = newConst(argLt1.val.AuxInt32() + argLt2.val.AuxInt32())
   336  	//	case OpDiv8:
   337  	//		if !isDivideByZero(argLt2.val.AuxInt8()) {
   338  	//			res.val = newConst(argLt1.val.AuxInt8() / argLt2.val.AuxInt8())
   339  	//		}
   340  	//  ...
   341  	// 	}
   342  	//
   343  	// However, this would create a huge switch for all opcodes that can be
   344  	// evaluated during compile time. Moreover, some operations can be evaluated
   345  	// only if its arguments satisfy additional conditions(e.g. divide by zero).
   346  	// It's fragile and error prone. We did a trick by reusing the existing rules
   347  	// in generic rules for compile-time evaluation. But generic rules rewrite
   348  	// original value, this behavior is undesired, because the lattice of values
   349  	// may change multiple times, once it was rewritten, we lose the opportunity
   350  	// to change it permanently, which can lead to errors. For example, We cannot
   351  	// change its value immediately after visiting Phi, because some of its input
   352  	// edges may still not be visited at this moment.
   353  	constValue := f.newValue(val.Op, val.Type, f.Entry, val.Pos)
   354  	constValue.AddArgs(args...)
   355  	matched := rewriteValuegeneric(constValue)
   356  	if matched {
   357  		if isConst(constValue) {
   358  			return lattice{constant, constValue}
   359  		}
   360  	}
   361  	// Either we can not match generic rules for given value or it does not
   362  	// satisfy additional constraints(e.g. divide by zero), in these cases, clean
   363  	// up temporary value immediately in case they are not dominated by their args.
   364  	constValue.reset(OpInvalid)
   365  	return lattice{bottom, nil}
   366  }
   367  
   368  func (t *worklist) visitValue(val *Value) {
   369  	if !possibleConst(val) {
   370  		// fast fail for always worst Values, i.e. there is no lowering happen
   371  		// on them, their lattices must be initially worse Bottom.
   372  		return
   373  	}
   374  
   375  	oldLt := t.getLatticeCell(val)
   376  	defer func() {
   377  		// re-visit all uses of value if its lattice is changed
   378  		newLt := t.getLatticeCell(val)
   379  		if !equals(newLt, oldLt) {
   380  			if int8(oldLt.tag) > int8(newLt.tag) {
   381  				t.f.Fatalf("Must lower lattice\n")
   382  			}
   383  			t.addUses(val)
   384  		}
   385  	}()
   386  
   387  	switch val.Op {
   388  	// they are constant values, aren't they?
   389  	case OpConst64, OpConst32, OpConst16, OpConst8,
   390  		OpConstBool, OpConst32F, OpConst64F: //TODO: support ConstNil ConstString etc
   391  		t.latticeCells[val] = lattice{constant, val}
   392  	// lattice value of copy(x) actually means lattice value of (x)
   393  	case OpCopy:
   394  		t.latticeCells[val] = t.getLatticeCell(val.Args[0])
   395  	// phi should be processed specially
   396  	case OpPhi:
   397  		t.latticeCells[val] = t.meet(val)
   398  	// fold 1-input operations:
   399  	case
   400  		// negate
   401  		OpNeg8, OpNeg16, OpNeg32, OpNeg64, OpNeg32F, OpNeg64F,
   402  		OpCom8, OpCom16, OpCom32, OpCom64,
   403  		// math
   404  		OpFloor, OpCeil, OpTrunc, OpRoundToEven, OpSqrt,
   405  		// conversion
   406  		OpTrunc16to8, OpTrunc32to8, OpTrunc32to16, OpTrunc64to8,
   407  		OpTrunc64to16, OpTrunc64to32, OpCvt32to32F, OpCvt32to64F,
   408  		OpCvt64to32F, OpCvt64to64F, OpCvt32Fto32, OpCvt32Fto64,
   409  		OpCvt64Fto32, OpCvt64Fto64, OpCvt32Fto64F, OpCvt64Fto32F,
   410  		OpCvtBoolToUint8,
   411  		OpZeroExt8to16, OpZeroExt8to32, OpZeroExt8to64, OpZeroExt16to32,
   412  		OpZeroExt16to64, OpZeroExt32to64, OpSignExt8to16, OpSignExt8to32,
   413  		OpSignExt8to64, OpSignExt16to32, OpSignExt16to64, OpSignExt32to64,
   414  		// bit
   415  		OpCtz8, OpCtz16, OpCtz32, OpCtz64,
   416  		// mask
   417  		OpSlicemask,
   418  		// safety check
   419  		OpIsNonNil,
   420  		// not
   421  		OpNot:
   422  		lt1 := t.getLatticeCell(val.Args[0])
   423  
   424  		if lt1.tag == constant {
   425  			// here we take a shortcut by reusing generic rules to fold constants
   426  			t.latticeCells[val] = computeLattice(t.f, val, lt1.val)
   427  		} else {
   428  			t.latticeCells[val] = lattice{lt1.tag, nil}
   429  		}
   430  	// fold 2-input operations
   431  	case
   432  		// add
   433  		OpAdd64, OpAdd32, OpAdd16, OpAdd8,
   434  		OpAdd32F, OpAdd64F,
   435  		// sub
   436  		OpSub64, OpSub32, OpSub16, OpSub8,
   437  		OpSub32F, OpSub64F,
   438  		// mul
   439  		OpMul64, OpMul32, OpMul16, OpMul8,
   440  		OpMul32F, OpMul64F,
   441  		// div
   442  		OpDiv32F, OpDiv64F,
   443  		OpDiv8, OpDiv16, OpDiv32, OpDiv64,
   444  		OpDiv8u, OpDiv16u, OpDiv32u, OpDiv64u, //TODO: support div128u
   445  		// mod
   446  		OpMod8, OpMod16, OpMod32, OpMod64,
   447  		OpMod8u, OpMod16u, OpMod32u, OpMod64u,
   448  		// compare
   449  		OpEq64, OpEq32, OpEq16, OpEq8,
   450  		OpEq32F, OpEq64F,
   451  		OpLess64, OpLess32, OpLess16, OpLess8,
   452  		OpLess64U, OpLess32U, OpLess16U, OpLess8U,
   453  		OpLess32F, OpLess64F,
   454  		OpLeq64, OpLeq32, OpLeq16, OpLeq8,
   455  		OpLeq64U, OpLeq32U, OpLeq16U, OpLeq8U,
   456  		OpLeq32F, OpLeq64F,
   457  		OpEqB, OpNeqB,
   458  		// shift
   459  		OpLsh64x64, OpRsh64x64, OpRsh64Ux64, OpLsh32x64,
   460  		OpRsh32x64, OpRsh32Ux64, OpLsh16x64, OpRsh16x64,
   461  		OpRsh16Ux64, OpLsh8x64, OpRsh8x64, OpRsh8Ux64,
   462  		// safety check
   463  		OpIsInBounds, OpIsSliceInBounds,
   464  		// bit
   465  		OpAnd8, OpAnd16, OpAnd32, OpAnd64,
   466  		OpOr8, OpOr16, OpOr32, OpOr64,
   467  		OpXor8, OpXor16, OpXor32, OpXor64:
   468  		lt1 := t.getLatticeCell(val.Args[0])
   469  		lt2 := t.getLatticeCell(val.Args[1])
   470  
   471  		if lt1.tag == constant && lt2.tag == constant {
   472  			// here we take a shortcut by reusing generic rules to fold constants
   473  			t.latticeCells[val] = computeLattice(t.f, val, lt1.val, lt2.val)
   474  		} else {
   475  			if lt1.tag == bottom || lt2.tag == bottom {
   476  				t.latticeCells[val] = lattice{bottom, nil}
   477  			} else {
   478  				t.latticeCells[val] = lattice{top, nil}
   479  			}
   480  		}
   481  	default:
   482  		// Any other type of value cannot be a constant, they are always worst(Bottom)
   483  	}
   484  }
   485  
   486  // propagate propagates constants facts through CFG. If the block has single successor,
   487  // add the successor anyway. If the block has multiple successors, only add the
   488  // branch destination corresponding to lattice value of condition value.
   489  func (t *worklist) propagate(block *Block) {
   490  	switch block.Kind {
   491  	case BlockExit, BlockRet, BlockRetJmp, BlockInvalid:
   492  		// control flow ends, do nothing then
   493  		break
   494  	case BlockDefer:
   495  		// we know nothing about control flow, add all branch destinations
   496  		t.edges = append(t.edges, block.Succs...)
   497  	case BlockFirst:
   498  		fallthrough // always takes the first branch
   499  	case BlockPlain:
   500  		t.edges = append(t.edges, block.Succs[0])
   501  	case BlockIf, BlockJumpTable:
   502  		cond := block.ControlValues()[0]
   503  		condLattice := t.getLatticeCell(cond)
   504  		if condLattice.tag == bottom {
   505  			// we know nothing about control flow, add all branch destinations
   506  			t.edges = append(t.edges, block.Succs...)
   507  		} else if condLattice.tag == constant {
   508  			// add branchIdx destinations depends on its condition
   509  			var branchIdx int64
   510  			if block.Kind == BlockIf {
   511  				branchIdx = 1 - condLattice.val.AuxInt
   512  			} else {
   513  				branchIdx = condLattice.val.AuxInt
   514  			}
   515  			t.edges = append(t.edges, block.Succs[branchIdx])
   516  		} else {
   517  			// condition value is not visited yet, don't propagate it now
   518  		}
   519  	default:
   520  		t.f.Fatalf("All kind of block should be processed above.")
   521  	}
   522  }
   523  
   524  // rewireSuccessor rewires corresponding successors according to constant value
   525  // discovered by previous analysis. As the result, some successors become unreachable
   526  // and thus can be removed in further deadcode phase
   527  func rewireSuccessor(block *Block, constVal *Value) bool {
   528  	switch block.Kind {
   529  	case BlockIf:
   530  		block.removeEdge(int(constVal.AuxInt))
   531  		block.Kind = BlockPlain
   532  		block.Likely = BranchUnknown
   533  		block.ResetControls()
   534  		return true
   535  	case BlockJumpTable:
   536  		// Remove everything but the known taken branch.
   537  		idx := int(constVal.AuxInt)
   538  		if idx < 0 || idx >= len(block.Succs) {
   539  			// This can only happen in unreachable code,
   540  			// as an invariant of jump tables is that their
   541  			// input index is in range.
   542  			// See issue 64826.
   543  			return false
   544  		}
   545  		block.swapSuccessorsByIdx(0, idx)
   546  		for len(block.Succs) > 1 {
   547  			block.removeEdge(1)
   548  		}
   549  		block.Kind = BlockPlain
   550  		block.Likely = BranchUnknown
   551  		block.ResetControls()
   552  		return true
   553  	default:
   554  		return false
   555  	}
   556  }
   557  
   558  // replaceConst will replace non-constant values that have been proven by sccp
   559  // to be constants.
   560  func (t *worklist) replaceConst() (int, int) {
   561  	constCnt, rewireCnt := 0, 0
   562  	for val, lt := range t.latticeCells {
   563  		if lt.tag == constant {
   564  			if !isConst(val) {
   565  				if t.f.pass.debug > 0 {
   566  					fmt.Printf("Replace %v with %v\n", val.LongString(), lt.val.LongString())
   567  				}
   568  				val.reset(lt.val.Op)
   569  				val.AuxInt = lt.val.AuxInt
   570  				constCnt++
   571  			}
   572  			// If const value controls this block, rewires successors according to its value
   573  			ctrlBlock := t.defBlock[val]
   574  			for _, block := range ctrlBlock {
   575  				if rewireSuccessor(block, lt.val) {
   576  					rewireCnt++
   577  					if t.f.pass.debug > 0 {
   578  						fmt.Printf("Rewire %v %v successors\n", block.Kind, block)
   579  					}
   580  				}
   581  			}
   582  		}
   583  	}
   584  	return constCnt, rewireCnt
   585  }
   586
View as plain text